Cornelius ABS 2.0 Operator's Manual page 36

ABS 2.0 Operator's Manual
4. Enter "Unit Setup." Select "Syrup Valve Purging." As
shown in Figure Figure 62.
5. Press the brand button to open the valve. Press the
button again to close the valve as shown in Figure
Figure 63.
6. Repeat the steps from Figure Figure Figure Purging Valves (Soap) on Page 30 with potable water, sanitizer
solution and again with potable water to rinse the lines off from sanitizer solution.
7. Clean the nozzle following the procedure Page 17.
8. Remove the sanitizing fittings from the BIB "disconnects" and connect them to the appropriate BIB con-
tainer. Operate all of the brand options until all of the sanitizing solution has been flushed from the system
and the syrup is flowing freely.
Publication Number: 621058590OPR
Figure 62.
Figure 63.
- 32 - © 2019, Cornelius Inc.