Clean Drip-Tray Area - Cornelius ABS 2.0 Operator's Manual

ABS 2.0 Operator's Manual

Clean Drip-Tray Area

1. Make sure water deflector is properly installed,
this will help prevent motor failures. (Order
replacement if the deflector is missing) as shown
in Figure Figure 14.
2. Pour warm (NOT HOT) water down the drip-tray
drain. Flush the drip-tray using carbonated water
as shown in Figure Figure 15.
3. Wash the drip-tray area, splash panel and clean
any spills from the machine exterior using Soap
Solution with a clean cloth as shown in Figure
Figure 16.
Publication Number: 621058590OPR
Figure 14.
Figure 15.
Figure 16.
- 14 -
Drain line
© 2019, Cornelius Inc.