HP 8712C User Manual page 503

Rf network analyzers
Table of Contents

Advertisement

Much of the required safety information is distributed throughout this manual
in appropriate places. This section contains all required safety information
that is not included elsewhere in this manual.
Warning denotes a hazard. It calls attention to a procedure which, if not
Warning Definition
correctly performed or adhered to, could result in injury or loss of life. Do
not proceed beyond a warning note until the indicated conditions are
fully understood and met.
Warnings applicable to this instrument are:
No operator serviceable parts inside. Refer servicing to qualified
W A R N I N G
personnel. lb prevent electrical shock, do not remove covers.
If this product is not used as specified, the protection provided by the
W A R N I N G
,
e quipment could be impaired. This instrument must be used in a normal
condition (in which all means for protection are intact) only.
For continued protection against fire hazard replace line fuse only with
W A R N I N G
same type and rating (T 5 A/250 V). The use of other fuses or material is
prohibited.
This is a Safety Class I product (provided with a protective earthing
W A R N I N G
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact. Any
interruption of
is likely to make the instrument dangerous. Intentional interruption is
prohibited.
Safety Information
the
protective conductor, inside or outside the instrument,
11-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

8714c

Table of Contents