HP 8712C User Manual page 396

other user-specified bandwidth, center frequency, and Q of a bandpass filter.
See "Using Markers" in Chapter 4 for more information.
Access Keys: [MARKER' Maker Seaxh
the analyzer for serial devices. Make sure the rate you set matches the
requirement of the output device (see its manual for details).
Access keys: (j-1 Select Copy Pe~?t
off (0) to high (100). The default is 90.
Access keys:
the four types of devices in the begin menu. Recommended for one channel
measurements.
See "Using the CBEGIN) Key" in Chapter 3 for more information.
Access Keys: (EiZFGF] Limit Mer~u Add limit Add Max Line or
Add Min Lirre
See "Using Limit Lines" in Chapter 4 for more information.
Access Keys: (DISPLAY) Limit Mertu Add limit Add Max Lfne or
Add Mia Line
)
System CoaBg
OPTIONS
Reference
B
9-11