HP 8712C User Manual page 461

Spur Avoid
C A U T I O N
Spur Avoid
Opt ions
Access Keys:
S
switches between the default and an alternate configuration during a sweep
to avoid spurs.
N O T E
Sweeptime usually increases when this option is selected.
See "Reducing Trace Noise" in Chapter 5 for more information.
The measurement calibration must be performed with the same spur avoid
option used in the measurement or your results may be invalid.
Access Keys: [MENU] Spur llvafd apt ions
avoid, or none.
to perform structural return loss (SRL) measurements. See your
User's Guide Supplement for information.
(
SYSTEM OPTIONS
9 - 7 6
Reference
]