HP 8712C User Manual page 462

1. In IFREQ) menu, sets the start frequency of source. Minimum frequency is
300 kHz. When start is selected, the other frequency parameter is stop.
See "Entering Measurement Parameters" in Chapter 2 for more
information.
2. In [HARDj menu, starts print or plot as set in select copy port menu.
See "Printing and Plotting Measurement Results" in Chapter 4 for more
information.
setting the start and stop power points.
See Power %reep entry in this chapter for more information on the power
sweep function.
measurement trace and calculates the frequency span, mean, and standard
deviation of the amplitude response, and the peak-to-peak ripple.
See "To Use Marker Math Functions" in Chapter 4 for more information.
(Option ICZ, IBASIC, on&) Softkey in IBASIC menu. When a program is
ready to run, this softkey steps through the program one line at a time. Good
de-bugging tool.
See the HP Instrument BASIC User's Handbook for more information.
(
Access Keys:
SYSTEM OPTIONS
)
Reference
S
9 - 7 7