HP 8712C User Manual page 159

Flatness
1. This limit test requires that you hrst define a segment on the measurement
2. Press c-1 Limit !Ienu Mkr Limits .
3. Use the front panel knob or the m @) keys to select Flatness in the
4. Press Edi% Limit (#infHsx) 34ax L;imiz and enter the maximum
trace using markers 1 and 2 (or markers 3 and 4 for measurement channel
2). Then press (JZGXK] ?$x&w F~ctictltts ?!Wk#x Math FXatnsss
to enable the statistics marker search. See "'RI Use Marker Flatness"
earlier in this chapter for more information on using marker statistics.
marker limit test table. Turn this limit function on by pressing the
table changes to "on. '
limit using the front panel keypad and terminating the entry with the
k e y .
using the front panel keypad and terminating the entry with the [ml
key.
N O T E
Note that there are no visible limit lines or indicators on the display with this limit test function.
Therefore the
Limit Liars
function has no effect when using marker limits.
OFF
Using Instrument Functions
Using limit Testing
4-41