Table of Contents
Advertisement
s
frequency is 1.3 GHz for HP 8712C and 3.0 GHz for HP 8714C.
measurement. Pcr=#~ SwoeesP in @iYLFF] menu must be selected before
setting the start and stop power points.
See Pox~er Sweep entry in this chapter for more information on the power
sweep function.
internal volatile RAM to a disk in the analyzer's built in 3.5" disk drive. This
To Disk
function is used to make a backup copy of CC data.
See the Service Guide for more information.
Access Keys:
internal volatile RAM to EPROM. This function is used so that current CC
To EPROM
data is not lost when power to the analyzer is turned off.
See the Service Guide for more information.
Access Keys:
sweep tune (fastest possible), manual sweep, alternate sweep, or power
sweep.
rear panel to be pulled high during a sweep.
Access Keys:
9 - 7 8
Reference
[
) Updats Ccrrr Const
SYSTEM OPTIONS
(
] Up&&.e
SYSTEM OPTIONS
(
)
SYSTEM OPTIONS
Advertisement
Table of Contents
