Table of Contents
Advertisement
Using Instrument Functions
Using a Keyboard
For example, to select measurement channel 1 as the active channel, on
the keyboard press 1Shift) with [n. 'lb preset the network analyzer with the
keyboard, press @ with (f4. In each case hold down the Grst key as you
press the second key. lb select Saftkq i , press [nl alone.
In case of difhculty, make sure that the keyboard is connected to the DIN
KEYBOARD connector on the rear panel. The keyboard must be IBM PC/AT
compatible.
Print capabilities:
When you use the analyzer 1-1 function to dump a graph, you don't
get the softkey menu that appears on the right-hand side of the analyzer
display.
Pressing (Shift @XGZScreen) on a keyboard will dump the current graph along
with the current softkey menu.
4-100
Advertisement
Table of Contents
