HP 8712C User Manual page 428

lines on or off, and to reposition and enable/disable the pass/fail indicator and
See "Customizing the Display" in Chapter 4 for more information.
Access Keys: c-j Limit Maatu
"FAIL" or "PASS" notation may be displayed on the CRT. Pass/fail information
is also routed to the LIMIT TEST TTL IN/OUT connector on the rear panel of
the analyzer. The limits need not be visible (set to ON) for the limit test to be
valid.
See "Using Limit Testing" in Chapter 4 for more information.
Access Keys: (-1 Ltikt #gnu
fail icon. The fail icon is enabled/disabled with the LPmE% Icon 01 off
See "Customizing the Display" in Chapter 4 for more information.
Access Keys:
transmission coefficient, displays a reflection trace in terms of reflection
coefficient, displays an aux input trace in volts (from 1 mV/div to 20 V/div).
values. Trace values for Cartesian format are in two columns: frequency and
amplitude. Trace values for polar format are in three columns: frequency,
magnitude, and phase. Trace values for Smith chart format are also in three
columns: frequency, resistance and complex impedance.
Reference
!
9 - 4 3