HP 8712C User Manual page 285

Automating Measurements
Configuring Your Test System
Stand-Alone Network
In this configuration, the measurement is controlled directly by the operator,
Analyzers
with very little automation. No computer or IBASIC control is used,
however the fast recall feature may be used for quickly changing to different
instrument states. This configuration is well suited for simple go/no-go device
testing using the built-in limit testing features. Configure your system as a
stand-alone analyzer if you would like to:
l
l
l
Figure 7-l shows a stand-alone network analyzer.
7 - 6
Reduce capital expense
Allow for future expansion with minimal effort
Minimize the space required for a system
N E T W O R K A N A L Y Z E R
Figure 7-l. Stand-Alone Network Analyzer