HP 8712C User Manual page 419

H
external monitors. Also affects network analyzer's internal CRT. Default
setting is 31.68 psec. This setting is not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information.
Access Keys:
the display on both the internal CRT and an external monitor. Accepts whole
number values from 1 to 100, with 1 representing as far left as possible and
with 100 representing as far right as possible. The default value set at the
factory (and obtained by pressing Roetore Def&uI%s) is 73. This setting is
not affected by an instrument preset.
See "Using an External VGA Monitor" in Chapter 4 for more information on
using an external display.
(
Access Keys:
SYSTEM OPTIONS
states that are to be used in older model ("A" or "B") analyzers.
See "Saving and Recalling Measurement Results" in Chapter 4 for more
information.
(
Access Keys:
SAVE RECALL
saved file to be compatible with older model ("A" or "B") analyzers.
See "Saving and Recalling Measurement Results" in Chapter 4 for more
information.
Access Keys:
9-34
Reference
]
OPTIONS
_)
]
Define Save File Falrmat
]
RECALL