Reference
P
information.
device at HP-IB port, for HP-h3 printers and plotters only. The default address
is 5. The "recognized HP-IB address" is the address that the network analyzer
uses to communicate with the device. The actual address of the device must
be set independently to match.
See "Connecting and Configuring Printers and Plotters" in Chapter 4 for more
information.
Access Keys: (-1 Sslect Copy Port
inch. Check printer manual for appropriate setting. Default is 96 dots per
Resolution
See "Connecting and Configuring Printers and Plotters" in Chapter 4 for more
information on printer resolution.
Access Keys:
(Option ICZ, BASIC, on&) Softkey in
(
)
menu. Displays menu to
SAVE RECALL
save, re-save, recall programs, or save a program as an autostart (AUTOST)
program.
See the HP Instrument BASIC User's Handbook for more information.
factory default of 0 dBm) that the analyzer will always return to when the
a t
e 1s ressed. Be sure to terminate your entry with one of the
P R E S E T
9-61