Mode / Set Switch; Changing Units - Polaris 850 PRO-RMK 155 2020 Manual

MODE / SET SWITCH

The instrument cluster contains indicator lights and the
rider information center. The information center can be
controlled by either the MODE and SET buttons on the
instrument cluster or by the MODE/SET switch
console.
INSTRUMENT CLUSTER PINOUTS
INSTRUMENT CLUSTER PINOUTS
FUNCTION
CAN High - YELLOW
CAN Low - DK GREEN
DC Gauge Voltage (VDC) - RD/BK
Ground - BRN/WHT
High Beam Signal - YEL/RED
Fuel Level - VT/WHT (If applicable)
LH Set Switch - WHT/BLK
LH Mode Switch - WHT/RED
NOTICE
CAN wires are twisted together and must remain
twisted to prevent interference.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.

CHANGING UNITS

The odometer and temperature displays can be viewed
in either standard or metric units of measurement. Both
displays change if units are changed. The new settings
s
on the will remain until changed by the operator.
Change Method 1
1. Press and hold the center
instrument cluster to enter the Options Menu.
2. Press and release the MODE button until engine
temperature appears in the information display area.
3. Press and release the SET button or SET switch to
change units.
Change Method 2
1. Press and release the SET button or SET switch until
the odometer appears in the information display area.
2. Press and hold the SET button or SET switch until the
units change.
PIN
1
2
4
5
8
11
12
13
BATTERY / ELECTRICAL
button on the
10.45
10