Polaris 850 PRO-RMK 155 2020 Manual page 391

10. Install new fuel rail mounting fasteners
tighten the fasteners evenly. Once both fasteners are
seated, torque to specification.
TORQUE
Fuel Rail Fasteners:
First Pass: 5 ft-lbs (6.5 N·m)
Second Pass: 15 ft-lbs (20 N·m)
q
11. Reconnect the fuel return
disconnect fittings. Wipe away any spilled fuel using a
clean shop towel. Firmly pull on each hose
connection to verify the hoses are secured.
IMPORTANT
Do not apply excessive pressure to fuel fittings or clips.
Verify proper operation of the fitting and clip by lightly
pulling on fitting to ensure it is secure before completing
repair.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
o
. Hand- 12. Re-install the throttle body. See throttle body
13. Secure the fuel injector wire leads to the throttle body
w
and supply quick-
14. Reinstall the air box assembly. Tighten air box-to-
installation.
TORQUE
Throttle Body Gear Clamps:
11 in-lbs (1.24 Nm)
NOTICE
Ensure the clamps are properly oriented. See
Component Orientation Views page 3.52.
a
with new cable ties .
s
throttle body gear clamps to specification.
TORQUE
Air Box Throttle Body Gear Clamps:
11 in-lbs (1.24 Nm)
FUEL SYSTEM
5
5.17