QUICKDRIVE LOW INERTIA SYSTEM
Inspect as outlined in the periodic maintenance table.
Belt replacement is required every 2,000 miles (3,200
km).
Inspect the drive system for the following items:
• Verify there are no missing drive cogs on the inside
q
circumference of the belt
• Verify there is no damage to the belt outer cover
w
• Inspect the upper
and lower sprockets
damage to the sprocket teeth
QuickDrive Low Inertia System Notes:
• The break-in period for a new drive belt is 100 miles
(160 km). During this period, the belt will shed a mold
release compound. As the compound sheds, it is
normal to see some amount of fiber-like material in
and around the drive system. Use a dry rag to clean.
• An audible sound may be heard during break-in. After
the break-in period, the drive system will sound similar
to a traditional chaincase.
• Do not crimp belt
• Do not back bend belt
• Do not twist belt
• Do not pry on belt to remove
• Store belt in original package - do not hang
• Avoid contact with solvents, oils, or chemical cleaners
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
e
for
MAINTENANCE
2
2.37