Polaris 850 PRO-RMK 155 2020 Manual page 382

FUEL SYSTEM
6. Remove the torx fasteners
retaining the intake plenum.
NOTICE
Cut the strain relief cable tie retaining the wiring
harness to the intake plenum.
7. Remove the push rivets
the intake plenum.
u
8. Remove the ziptie
to the chassis.
5.8
r t
and push rivets
y
retaining the intake tube to
securing the upper intake tube
9. Remove the fastener
tube.
10. Remove the diagnostic connector
11. Carefully remove the intake tube as an assembly.
12. Disconnect the ECU connectors
harness.
13. Carefully remove the intake plenum.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
i
retaining the lower intake
o
from the cap.
a
form the wiring
© Copyright Polaris Inc.