Polaris 850 PRO-RMK 155 2020 Manual page 238

ENGINE / COOLING / EXHAUST
48. Disconnect the throttle cable
from the throttle body
49. The throttle body may remain installed on the engine.
If the throttle body removal is required, remove the
following components:
• Coolant hoses from the throttle body
• Zip tie and routing clips securing the fuel injector
harness to the throttle body
• Loosen the two gear clamps
50. Remove the left side engine mounting bolts
3.38
4@
and remove the cable
4#
.
4$
.
51. Remove the right rear engine mounting bolt
52. Remove the fasteners
engine mount from the bottom of the clip.
53. Lift oil pump out of bracket as it needs to come out
with the engine.
54. The engine can now be removed by lifting the intake
side of the engine up. Pull the engine up and back
slightly and remove it on the PTO side of the chassis.
Have an assistant help lift the engine.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
4%
4^
securing the right front
NOTICE
© Copyright Polaris Inc.
.