Polaris 850 PRO-RMK 155 2020 Manual page 658

BATTERY / ELECTRICAL
2. Remove the top strip of caps on the electrolyte
package.
NOTICE
Retain this strip of caps for battery sealing after it has
been filled.
DO NOT pierce or otherwise open the foil seals on the
electrolyte container or attempt to separate the
individual electrolyte containers.
3. Place the electrolyte container with the foil seals
facing down into the cell filler ports on the battery.
4. Press down evenly to break the foil seals and allow
electrolyte to flow into the battery.
NOTICE
Air bubbles will begin to rise, indicating the flow of
electrolytes.
10.34
WARNING
5. Leave the container in place until it empties
completely. This can take more than 20 minutes to
complete.
The entire container must empty into the battery. DO
NOT tilt or puncture the electrolyte container to aid in
If no air bubbles rise from the battery or if the container
has not completely emptied after 20 minutes, gently tap
on the top of the container to aid the flow of electrolytes
6. Remove the empty electrolyte container from the
battery and immediately install the previously
removed strip of sealing caps onto the top of the
battery.
Only install caps by hand. DO NOT use a hammer or
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
IMPORTANT
filling.
NOTICE
into the battery.
NOTICE
excessive force.
© Copyright Polaris Inc.