User Settings Menu - Canon FAX-L200? FAX-L280 User Manual

USER SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
Default settings are shown in bold type.
Setting
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE #
MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR VOL
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
M-KEY SETTING
(UK only)
* The default setting for Ireland, Hong Kong, and Malaysia is ROTARY PULSE.
14-4
Summary of Settings
Description
Sets the current date and time (1 p. 3-6).
Enters the fax/telephone number you want to appear
at the top of each fax page you send (1 p. 3-6).
Enters the name or company name you want to appear
at the top of each fax page you send (1 p. 3-6).
Enables/disables printing of the sender information
(1 p. 3-5).
Selects whether the sender information is positioned
inside or outside the image area (1 p. 3-5).
Selects the prefix for the unit number (1 p. 3-5).
Selects the scanning contrast (1 p. 7-3).
Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its cradle.
Sets the volume of the FAX sounds.
Selects the ring volume when the FAX detects a voice
call.
Selects the keypad touch beep volume.
Selects the error alarm volume.
Selects the line monitor volume (sound during dialling).
Selects the ring type for incoming calls.
Selects the telephone line type setting for your FAX
(1 p. 3-8).
Enables dialling through a switchboard.
If you select PBX, you can select additional sub-settings
(1 p. 3-9).
Selects the access and ID codes for an alternative long
distance service (1 p. 7-18).
If you select ON, you can select additional sub-settings.
Sub-Settings
–
–
–
ON
OFF
OUTSIDE IMAGE
INSIDE IMAGE
FAX
TEL
STANDARD
DARKER
LIGHTER
ON
OFF
–
1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
0 (off)/1/2/3
HIGH
STANDARD
TOUCH TONE
ROTARY PULSE*
PSTN
PBX
OFF
ON
Chapter 14