Telecom Faxability; Setting The Fax-L360 For Network Switch - Canon FaxPhone L360 User Manual

Telecom FaxAbility

In New Zealand, Telecom N.Z. offers the FaxAbility capability. This
service allows you to assign two numbers to your line: one for fax and
one for telephone. When the fax number is called, the network sends a
specific ring tone which your unit recognises and automatically handles
as a fax call. If the telephone number is called, a different ring tone is sent
out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller's end.
Contact Telecom for connection information.

Setting the FAX-L360 for Network Switch

Follow this procedure to set the receive mode to NET SWITCH:
1. Open One-Touch Speed Dial panel, and press Data Registration.
2. Press Set.
3. Use
4. Press Set, then use
5. Press Set, then use
6. Press Set, then press Stop to return to standby mode.
D-10
Country-specific Features
Data
Registration
Set
or to select 4.RX SETTINGS.
Set
Set
Set
or to select 2.RX MODE.
or to select NET SWITCH.
R E G I S T R A T I O N
1 . D A T A R E G S T R A T I O N
D A T A R E G S T R A T I O N
1 . U S E R S E T T I N G S
D A T A R E G S T R A T I O N
4 . R X S E T T I N G S
R X S E T T I N G S
2 . R X M O D E
R X M O D E
N E T S W I T C H
3 1 / 1 2 2 0 0 2 T U E 1 0 : 0 0
N E T S W . S T A N D A R D
Appendix D