Telecom Faxability (New Zealand Only); Setting The Fax For Network Switch - Canon FAX-L200? FAX-L280 User Manual

Telecom FaxAbility (New Zealand Only)

In New Zealand, Telecom N.Z. offers the FaxAbility capability. This service allows you
to assign two numbers to your line: one for fax and one for telephone. When the fax
number is called, the network sends a specific ring tone which your unit recognises and
automatically handles as a fax call. If the telephone number is called, a different ring
tone is sent out from the network so that the call is handled as a voice call. This means
that there is no switching delay at the caller's end.
Contact Telecom for connection information.

Setting the FAX for Network Switch

Follow this procedure to set the receive mode to NET SWITCH:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
Use ∂ or ¨ to select RX MODE.
6
7
Press Set.
8 Use ∂ or ¨ to select NET SWITCH.
9
Press Set.
10
Press Stop to return to standby mode.
n
When the RX MODE setting is set to NET SWITCH, no other receive mode can be
selected with the Receive Mode button.
8-14
Receiving Faxes
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
NET SWITCH
INCOMING RING
Ex:
15:00 NET SW.
Chapter 8