Removing - Invacare 2G Tarsys Service Manual

DETAIL "A"
Connector
Cable
DETAIL "B"
FIGURE 10.3 Installing/Removing Flip-Back Armrests

Removing

1. Disconnect joystick. Refer to Detail "A."
2. Cut the tie-wrap attaching the joystick cable to the back cane (not shown).
3. Unlock the flip-back armrest by positioning the flip-back armrest release lever into the
up (horizontal) position. Refer to Detail "C".
4. Remove the quick-release pin that secures the flip-back armrest to the rear arm socket.
5. Pull on the flip-back armrest and remove the armrest from the arm sockets.
6. Repeat STEPS 3-5 for the opposite flip-back armrest, if necessary.
Part No 1114842
Joystick
Connector
Toggle
Switch
Bolts
117
Flip Back
Armrest
Flip Back
Armrest
Release Lever
Rear
Arm
Socket
Quick-
Release
Front
Pin
Arm
Socket
2G Tarsys®Powered Seating System
SECTION 10—ARMS
DETAIL "C"
Locked
(Down -
Vertical)
Unlocked
(Up - Horizontal)
Seat
Frame