Invacare 2G Tarsys Service Manual page 160

SECTION 15—WIRING AND CABLES
ii. The remaining person should secure the recline links to the front pivot
assembly in the position noted using the two shoulder bolts and locknuts.
Torque to 23 ft-lbs ± 20%.
• Tilt Only or Tilt/Recline Systems - Use the tilt mechanism to return the seat to the
upright position.
Lower Seat
Shroud
Left Tie-Wrap
NOTE: Right
and left are
determined
from the
perspective of
an observer in
front of the
wheelchair.
FIGURE 15.4 Power Elevating Legrest, Recline Actuator and Recline Potentiometer Cables -
The wheelchair MUST be reclined backward to the maximum position before
securing the power elevating legrest, recline actuator and recline potentiometer
cables to prevent stretching and possibly breaking cables.
7. Recline back as far as possible.
8. From behind the wheelchair, tie-wrap the power elevating legrest, recline actuator
and recline potentiometer cables to the tilt actuator. Refer to FIGURE 15.5.
2G Tarsys®Powered Seating System
Tie-Wrap to Lower Seat Shroud
CAUTION
160
Top View
Right Tie-Wraps
Part No 1114842