Invacare 2G Tarsys Service Manual page 29

SECTION 5—INTERFACE HARDWARE
TABLE 4 - 2GR Systems WITH Center Mount Footrests AND
Ventilator-Ready Battery Tray
SEAT MOUNTING POSITION
DEPTH
16-INCH
Rear Pivot
Assembly
Front Pivot Assembly
Hex Screw
Spacer Bar
Seat Bracket
Lower Interface
Bracket
Washer
Locknut
Locknuts
DO NOT Remove -
Hex Screws
Exploded for Clarity
NOTE: Torque the hardware as listed below:
• Hex screws or socket screws (securing the rear pivot): 75 in-lbs ± 20%.
• Hex screws (securing the front pivot assembly and front of seat bracket) and shoulder
screw (securing the tilt actuator): 13 ft-lbs ± 20%.
29
Part No 1114842 2G Tarsys®Powered Seating System