Invacare 2G Tarsys Service Manual page 40

SECTION 5—INTERFACE HARDWARE
TABLE 13 - 2GT and 2GTR Systems WITH Center Mount Footrests AND
SEAT
DEPTH
20-INCH
*NOTE: Linear guides are exploded for clarity. DO NOT disconnect the upper
and lower portions of the linear guides. The linear guide cannot be reassembled.
Tilt Actuator
Rear Pivot Assembly
Linear Guide*
Socket Screw
Seat Bracket
Lower Interface
Bracket
NOTE: Torque the hardware as listed below:
• Hex screws or socket screws (securing the rear pivot): 75 in-lbs ± 20%.
• Hex screws (securing the front pivot assembly and front of seat bracket) and shoulder
screw (securing the tilt actuator): 13 ft-lbs ± 20%.
2G Tarsys®Powered Seating System
Ventilator-Ready Battery Tray
MOUNTING POSITION
Locknuts
(STEP 9)
Shim
Washer
Locknuts
Locknut
Hex Screw
Shoulder Bolt
and Locknut
Hex Screws
40
Front Pivot
Assembly
Part No 1114842