Section 4-Safety Inspection/Troubleshooting; Safety Inspection Checklist - Invacare 2G Tarsys Service Manual

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
SECTION 4—SAFETY
INSPECTION/TROUBLESHOOTING

Safety Inspection Checklist

These adjustments should be made whenever this product is serviced, especially as
part of the initial unit setup. Follow these procedures:
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
Make sure all electrical connections are secure.
Check that cables are routed and secured properly to ensure that cables DO NOT
become entangled and damaged during normal operation of seating system.
Make sure drive lock-out works properly.
Make sure tilt operates smoothly and properly.
Make sure recline operates smoothly and properly.
Ensure all fasteners are secure on clothing guards.
Ensure arms are secure but easy to release.
Ensure arm adjustment levers operate and lock securely.
Ensure adjustable height arms operate and lock securely.
Inspect for rips in upholstery on armrests.
Ensure armrest pad sits flush against arm tube.
Inspect seat and back cushions for rips or sagging.
Inspect hand grips for looseness. If loose, have them replaced by a qualified
technician.
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Check that all labels are present and legible. Replace if necessary.
2G Tarsys®Powered Seating System
CAUTION
20
Part No 1114842