Option Installation; Opening The Transceiver's Case; Optional Bracket And Carrying Handle - Icom IC-78 Instruction Manual

n

Opening the transceiver's case

Follow the case and cover opening procedures shown
below when you want to install an optional unit or ad-
just an internal unit, and so on.
CAUTION:
DISCONNECT the DC power cable
from the IC-78 before performing any work on the
transceiver. Otherwise, there is danger of electric
shock and/or equipment damage.
q Remove the 5 screws from the top of the transceiv-
er and 4 screws from the sides, then lift up the top
cover.
w Remove the 5 screws from the bottom of the trans-
ceiver, then remove the bottom cover.

Optional bracket and carrying handle

n
Mounting bracket
D
The universal mounting bracket allows overhead
mounting.
Installation
Securely mount the transceiver with the 4 supplied
screws (5 x 20) to a thick surface which can support
more than 3.8 kg.
CAUTION: Non-supplied bolts (longer than 8 mm)
may damage the internal units.
NEVER install the MB-118 with non-supplied
screws and bolts.
D
Carrying handle
An optional handle allows you to easily carry the
transceiver.
Attach the MB-23
CARRYING HANDLE
rubber feet, as shown.

OPTION INSTALLATION

and the supplied
6
MB-118
Flat washer
Bolt
(M4 × 8)
Screw
(5 × 20)
Spring washer
36