Led Indications - Planet Networking & Communication IGS-10020HPT User Manual

2.1.3 LED Indications

System
LED Color
P1 Green
P2 Green
Fault Green
Ring Green
R.O. Green
Per 10/100/1000Mbps port with PoE
LED Color
10/100/1000
Green
LNK/ACT
PoE-in-Use Orange
IGS-10020PT
Lights to indicate that the Switch has power.
Lights to indicate that the Switch has power.
Lights to indicate power failure.
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Switch has been enabled to Ring Owner.
Lights to indicate the port is running in 10/100/1000Mbps speed and successfully
established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
To indicate the port is providing up to 56V DC in-line power.
Lights:
To indicate the connected device is not a PoE Powered Device (PD).
Off:
User's Manual of IGS PoE series
IGS-10020HPT
Function
Function
29