Led Indications - Planet Networking & Communication LRP-822CS User Manual

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; it helps monitor and troubleshoot
when needed. Figures 2-1-2A and 2-1-2B
LRP-822CS LED Indication
■ System / Alert
LED Color
PWR Green
SYS Green
FAN 1 Red
FAN 2 Red
FAN 3 Red
PWR Red
■ Long Reach PoE Interfaces (Port-1 to Port-8)
LED Color
LNK Green
PoE Orange
■ 10/100/1000BASE-T Interfaces (GE1 to GE2)
LED Color
LNK/ACT Green
1000 Orange
show the LED indications of these LRP Managed Switches.
Figure 2-1-2 LRP-822CS LED Panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Off to indicate the system is booting.
Lights to indicate that Fan 1 is down.
Lights to indicate that Fan 2 is down.
Lights to indicate that Fan 3 is down.
Lights to indicate that the PoE Power is down.
To indicate the link through that port is successfully established.
Lights
To indicate the port is providing DC in-line power.
Lights
To indicate the link through that port is successfully established.
Lights
Blinking To indicate that the switch is actively sending or receiving data over that port.
To indicate that the port is operating at 1000Mbps.
Lights
When LNK/ACT LED lights up, it indicates that the port is operating at 10/100Mbps.
Lights
When LNK/ACT LED is off, it indicates that the port is linkdown.
Off
User's Manual of LRP-822CS/LRP-1622CS
Function
Function
Function
25