2.1.3 LED Indications
IGS-5225-8T2S2X
System
LED
Color
P1
Green
P2
Green
Fault
Red
Ring
Green
R.O.*
Green
I/O
Red
Per 10/100/1000BASE-T Port
LED
Color
1000
Green
LNK/ACT
100
Orange
LNK/ACT
Per SFP Interface
LED
Color
1000
Green
LNK/ACT
100
Orange
LNK/ACT
Per SFP+ Interface
LED
Color
10G
Orange
LNK/ACT
1G LNK/ACT
Green
Indicates power 1 has power.
Indicates power 2 has power.
Indicates either power 1 or power 2 has no power.
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Switch has enabled Ring Owner.
Blinks to indicate that Switch DC or port has failed or DI has event.
Lights to indicate the port is running at 1000Mbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 10/100Mbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 1000Mbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 100Mbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 10Gbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 1Gbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
Function
Function
Function
Function
29