Installing The Sfp Transceiver - Planet Networking & Communication IGS-10020HPT User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Industrial Managed PoE+ Switch as

Approved PLANET SFP/SFP+ Transceivers
PLANET Industrial Managed PoE+ Switch supports both single mode and multi-mode SFP transceivers. The following
list of approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model DDM
MFB-FX --
MFB-F20 --
MFB-F40 --
MFB-F60 --
MFB-F120 --
MFB-TFX --
MFB-TF20 --
Figure 2-18
Figure 2-18: Plugging in the SFP/SFP+ Transceiver
Connector
Speed (Mbps)
Interface
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
User's Manual of IGS PoE series
appears.
Fiber Mode Distance
Multi Mode 2km
Single Mode 20km
Single Mode 40km
Single Mode 60km
Single Mode 120km
Multi Mode 2km
Single Mode 20km
43
Operating
Wavelength (nm)
Temp.
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1550nm
-40 ~ 75 ℃
1310nm
-40 ~ 75 ℃
1310nm