Igmp Snooping Configuration - Planet Networking & Communication IGS-10020HPT User Manual

4.3.5.4 IGMP Snooping Configuration

This page provides IGMP Snooping related configuration. The IGMP Snooping Configuration screen in
The page includes the following fields:
Object
•
Snooping Enabled
•
Unregistered IPMCv4
Flooding Enabled
• IGMP SSM Range
• Leave Proxy Enable
• Proxy Enable
• Router Port
Figure 4-3-5-7: IGMP Snooping Configuration Page Screenshot
Description
Enable the Global IGMP Snooping.
Enable unregistered IPMCv4 traffic flooding.
The flooding control takes effect only when IGMP Snooping is enabled.
When IGMP Snooping is disabled, unregistered IPMCv4 traffic flooding is always
active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range.
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Specify which ports act as IGMP router ports. A router port is a port on the
User's Manual of IGS PoE series
190
Figure 4-3-5-7 appears.