Led Indications - Planet Networking & Communication WGSW-50040 Configuration Manual

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity, system operation, Stack status and
system power, helps monitor and troubleshoot when needed.
WGSW-50040 LED indication
■ System
LED Color
Green
PWR
Off
Green
SYS
Yellow
■ 10/100/1000Base-T interfaces
LED Color
Green
LNK/ACT
Yellow
Off
■ SFP interfaces
LED Color
Green
LNK/ACT
Off
Figure 2-2 WGSW-50040 LED panel
Lights to indicate that the Switch has power.
Power is off.
Lights to indicate the system diagnoses is completed.
Blink to indicate boot is enable.
Lights to indicate the system diagnoses is under way.
Blink to indicate the system diagnoses is malfunctioning.
Lights to indicate the link through that port is successfully established with
speed 1000Mbps.
Blink to indicate that the switch is actively sending or receiving data over that
port.
Lights to indicate the link through that port is successfully established with
speed 100Mbps or 10Mbps.
Blink to indicate that the switch is actively sending or receiving data over that
port.
No flow go through the port.
Lights to indicate the link through that port is successfully established with
speed 1000Mbps.
No flow go through the port.
2-2
Function
Function
Function