Acl Ports Configuration - Planet Networking & Communication IGS-10020HPT User Manual

Object
•
EtherType Filter
•
Ethernet Type Value
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.

4.5.5.4 ACL Ports Configuration

Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
Description
Specify the Ethernet type filter for this ACE.
Any: No EtherType filter is specified (EtherType filter status is
■
"don't-care").
Specific: If you want to filter a specific EtherType filter with this
■
ACE, you can enter a specific EtherType value. A field for entering a
EtherType value appears.
When "Specific" is selected for the EtherType filter, you can enter a specific
EtherType value.
The allowed range is 0x600 to 0xFFFF but excluding 0x800(IPv4), 0x806(ARP)
and 0x86DD(IPv6). A frame that hits this ACE matches this EtherType value.
Figure 4-5-5-4: ACL Ports Configuration Page Screenshot
329
User's Manual of IGS PoE series
Figure 4-5-5-4 appears.