Table of Contents
Advertisement
This section introduces the configuration and functions of the Web-based management.
About Web-based Management
The Industrial Managed PoE+ Switch offers management features that allow users to manage the Industrial Managed PoE+
Switch from anywhere on the network through a standard browser such as Microsoft Internet Explorer.
The Web-based Management supports Internet Explorer 8.0. It is based on Java Applets with an aim to reducing network
bandwidth consumption, enhancing access speed and presenting an easy viewing screen.
By default, IE7.0 or later version does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports.
The Industrial Managed PoE+ Switch can be configured through an Ethernet connection, making sure the manager PC must
be set to the same the IP subnet address with the Industrial Managed PoE+ Switch.
For example, the default IP address of the Industrial Managed PoE+ Switch is 192.168.0.100, then the manager PC should
be set to 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the Industrial Managed PoE+ Switch to 192.168.1.1 with subnet mask
255.255.255.0 via console, then the manager PC should be set to 192.168.1.x (where x is a number between 2 and 254) to do
the related configuration on manager PC.
Logging on to the Industrial Managed PoE+ Switch
1.
Use Internet Explorer 7.0 or above Web browser. Enter the factory-default IP address to access the Web interface. The
factory-default IP address is as follows:
http://192.168.0.100
4. WEB CONFIGURATION
Figure 4-1-1: Web Management
55
User's Manual of IGS PoE series
Advertisement
Table of Contents
