Dscp-Based Qos - Planet Networking & Communication IGS-10020HPT User Manual

Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.4.4.2 DSCP-based QoS

This page allows you to configure the basic QoS DSCP-based QoS Ingress Classification settings for all switches. The
DSCP-based QoS screen in
Figure 4-4-4-2: DSCP-based QoS Ingress Classification Page Screenshot
Enable: Rewrite enable without remapped.

Remap DP Unaware: DSCP from analyzer is remapped and frame is

remarked with remapped DSCP value. The remapped DSCP value is
always taken from the 'DSCP Translation->Egress Remap DP0' table.
Remap DP Aware: DSCP from analyzer is remapped and frame is

remarked with remapped DSCP value. Depending on the DP level of the
frame, the remapped DSCP value is either taken from the 'DSCP
Translation->Egress Remap DP0' table or from the 'DSCP
Translation->Egress Remap DP1' table.
Figure 4-4-4-2 appears.
User's Manual of IGS PoE series
261