Cable Diagnostics - Planet Networking & Communication IGS-10020HPT User Manual

The page includes the following fields:
Object
• Port
•
Remote IP Address
•
Ping Size
•
Result
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Clears the IP Address and the result of ping value.

4.9.2.4 Cable Diagnostics

This page is used for running the Cable Diagnostics.
Press to run the diagnostics. This will take approximately 5 seconds. If all ports are selected, this can take approximately 15
seconds. When completed, the page refreshes automatically, and you can view the cable diagnostics results in the cable status
table. Note that Cable Diagnostics is only accurate for cables of length 7 - 140 meters.
Figure 4-9-2-3: Remote IP Ping Test Page Screenshot
Description
The logical port for the settings.
The destination IP Address.
The payload size of the ICMP packet. Values range from 8 bytes to 1400 bytes.
Display the ping result.
386
User's Manual of IGS PoE series