Vlan Setting Example; Two Separate 802.1Q Vlans - Planet Networking & Communication IGS-10020HPT User Manual

4.3.3.8 VLAN setting example:


Separate VLAN

802.1Q VLAN Trunk

Port Isolate

4.3.3.8.1 Two Separate 802.1Q VLANs

The diagram shows how the Industrial Managed PoE+ Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN
Group 2 and VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive
traffic from the same VLAN members. The screen in
of the Industrial Managed PoE+ Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario is described as follows:

Untagged packet entering VLAN 2
Figure 4-3-3-7
Figure 4-3-3-7: Two Separate VLANs Diagram
VID Untagged Members
1 Port-7 ~ Port-52
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-1: VLAN and Port Configuration
154
User's Manual of IGS PoE series
appears and Table 4-3-3-8 describes the port configuration
Tagged Members
N/A
Port-3
Port-6