Led Indications - Planet Networking & Communication WGSW-48040HP User Manual

2.1.2 LED Indications

The front panel LEDs indicate instant status of power and system status, fan status, port links / PoE in-use and data activity;
they help monitor and troubleshoot when needed.
WGSW-48040HP LED Indication
WGSW-48040HP LED Indication Table
■ System
LED Color
PWR Green
SYS Green
■ Alert
LED Color
FAN1 Red
FAN2 Red
 Per 10/100/1000Mbps port with PoE interfaces (Port-1 to Port-48)
LED Color
LNK/ACT Green
PoE In-Use Orange
 Per 100/1000Mbps SFP Combo Interface (Port-45 to Port-48)
LED Color
LNK/ACT Green
Figure 2-1-2
Figure 2-1-2: WGSW-48040HP LED at Front Panel
Lights to indicate that the Switch has power.
Lights to indicate the system is working.
Lights to indicate that the FAN1 Group failure.
Lights to indicate that the FAN2 Group failure.
Indicates the link through that port is successfully established at
Lights:
10/100/1000Mbps.
Blink:
Indicates that the Switch is actively sending or receiving data over that port.
Lights: Indicates the port is providing 52V DC in-line power.
Indicates the connected device is not a PoE Powered Device (PD).
Off:
Lights.
Indicates the port is successfully established at 100/1000Mbps.
Blink:
Indicates that the Switch is actively sending or receiving data over that port.
User's Manual of WGSW-48040HP
shows the LED indications of the Managed Switch.
Function
Function
Function
Function
22