2.1.3 LED Indications
IGS-5225-4UP1T2S
System
LED
Color
DC1
Green
DC2
Green
Fault
Red
Ring
Green
R.O.
Green
DI/DO
Red
Per 10/100/1000BASE-T Port
LED
Color
1000
Green
LNK/ACT
100
Amber
LNK/ACT
Lights to indicate DC power input 1 has power.
Lights to indicate DC power input 2 has power.
Lights to indicate that Switch DC or port has failed.
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Ring state is in idle mode.
Blinks to indicate that the Ring state is in protected mode.
Blinks to indicate that Switch DC or port has failed or DI has event.
Lights to indicate the port is running at 1000Mbps speed and successfully established.
Blinks: indicates that the switch is actively sending or receiving data over that port.
Lights to indicate the port is running at 10/100Mbps speed and successfully established.
Blinks: indicates that the switch is actively sending or receiving data over that port.
User's Manual of IGS-5225 series
Function
Function
40