Led Indications - Planet Networking & Communication IGS-6325 Series User Manual

2.1.3 LED Indications

The front panel LEDs indicate instant status of power and Ring, R.O., DI/DO and Fault; they help monitor and troubleshoot
when needed. Figures 2-3 & 2-4
 System
LED Color
AC Green
DC1 Green
DC2 Green
Fault Red
Ring Green
R.O. Green
DI/DO Red
 Per 10/100/1000BASE-T Port
LED Color
1000
Green
LNK/ACT
show the LED indications of the Managed Switch.
Figure 2-3: IGS-6325-20T4C4X LED on Front Panel
Figure 2-4: IGS-6325-20T4C4X LED on Front Panel
Lights to indicate AC power input has power.
Lights to indicate DC power input 1 has power.
Lights to indicate DC power input 2 has power.
Lights to indicate that Switch DC or port has failed.
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Ring state is in idle mode.
Blinks to indicate that the Ring state is in protected mode.
Blinks to indicate that Switch DC or port has failed or DI has event.
Lights to indicate the port is running in 1000Mbps speed and successfully established.
Blinks to indicate that the switch is actively sending or receiving data over that port.
User's Manual of IGS-6325 series
Function
Function
26