Nortel Communication Server 1000 Fundamentals page 95

SET SPAN (S S)
This command allows the user to set the number of timeslots used by the
T1. Its display is similar to
Note:
user replaces the LMI for any reason, all values set with the SET
SPAN command and all commands on the Span setup menu must be
reconfigured.
Figure 56
SET SPAN (S S) screen
SET TIME (S T)
This command configures the time kept at the near end of the system. Its
display is similar to
Figure 57
SET TIME (S T) screen
Figure 56 "SET SPAN (S S) screen" (page
All SPAN configuration values are stored on the LMI. If the
Figure 57 "SET TIME (S T) screen" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Host MMI interface 95
95).
95).