Nortel Communication Server 1000 Fundamentals page 81

DISPLAY STATUS (D S)
This command displays the current condition of each link controlled by
the near-end mini-carrier interface card. Its display is similar to
"DISPLAY STATUS (D S) (at local site) screen" (page 81)
"DISPLAY STATUS (D S) (at remote site) screen" (page
Figure 25
DISPLAY STATUS (D S) (at local site) screen
Figure 26
DISPLAY STATUS (D S) (at remote site) screen
DISPLAY STATUS DISTANT (D S D)
This command displays the current condition of each link controlled by the
distant-end mini-carrier interface card. Its display is similar to
"DISPLAY STATUS (D S) (at local site) screen" (page 81)
"DISPLAY STATUS (D S) (at remote site) screen" (page
ESAM [SAVE | FORCE | NEVER | AUTO]
The ESAM commands involve the Emergency Stand Alone Mode and
how the user wishes it to be invoked. If the user types an E and presses
ENTER, the current ESAM setting and the available settings will be
displayed in a screen similar to
The commands are described in alphabetic order.
Note:
The ESAM SAVE command is reserved for future use.
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Figure 27 "ESAM (E) screen" (page
Host MMI interface 81
Figure 25
or Figure 26
81).
Figure 25
or Figure 26
81).
82).