92 Installation and configuration
Figure 49
SET ESAM: TRUNK PARAMETERS: TRUNK TYPE screen
b.
Figure 50
SET ESAM: TRUNK PARAMETERS: BALANCE IMPEDANCE screen
c.
Balance Impedance — This variation of the SET ESAM
command allows the user to change the balance impedance of the
trunk from its default of "Complex." Its display is similar to
50 "SET ESAM: TRUNK PARAMETERS: BALANCE IMPEDANCE
screen" (page
92).
Termination Impedance — This variation of the SET ESAM
command allows the user to change the termination impedance
of the trunk from its default of 600 ohms. Its display is similar to
Figure 51 "SET ESAM: TRUNK PARAMETERS: TERMINATION
IMPEDANCE screen:" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
93).
Figure