Nortel Communication Server 1000 Fundamentals page 94

94 Installation and configuration
Figure 53
SET ESAM: QUIT (NO SAVE) screen
8.
End (Save) — This command allows the user to exit the ESAM
setup menu and save any changes made to the system's ESAM
configuration settings during the session. Its display is similar to
54 "SET ESAM: END (SAVE) screen" (page
Figure 54
SET ESAM: END (SAVE) screen
SET NAME (S N)
This command sets the name of the near-end and remote sites. Its display
is similar to
Figure 55
SET NAME (S N) screen
Figure 55 "SET NAME (S N) screen" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Figure
94).
94).