Nortel Communication Server 1000 Fundamentals page 83

Figure 30
ESAM Never (E N) screen
Note:
ESAM toggle switch.
FIRMWARE
The FIRMWARE commands are reserved for future use.
PROVISION [UPLOAD [DIST]| DOWNLOAD [DIST] | REFRESH]
The PROVISION commands provide backup and restore capabilities for
the data stored in the flash memory (FM) or Flash Memory Module (FMM).
The commands are described in alphabetic order.
PROVISION DOWNLOAD (P D)
The Provision Download command downloads provisioning information
stored on the near-end's FM or FMM to a file using XMODEM or
XMODEM-1K file transfer. Prior to using this command, the PROVISION
REFRESH (P R) command should be performed. The display is similar to
Figure 31 "PROVISION DOWNLOAD (P D) screen" (page
Figure 31
PROVISION DOWNLOAD (P D) screen
PROVISION DOWNLOAD DISTANT (P D D)
The Provision Download Distant command downloads provisioning
data stored in the near-end card's FMM to the far-end card's FM or FMM.
After entering this command, you are prompted for the location to store the
information into: RAM, on-board non-volatile ROM (NVROM) or battery
backed RAM (BBRAM). Prior to using this command, the PROVISION
REFRESH (P R) command should be performed. The display is similar to
Figure 31 "PROVISION DOWNLOAD (P D) screen" (page
PROVISION REFRESH (P R)
The Provision Refresh command ensures that the LMI and RMI RAM
contains all of the provisioning information from every card in the system.
This command should be used before the PROVISION DOWNLOAD
command. The display is similar to
R) screen" (page
This configuration setting can be overridden by the faceplate
84).
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Host MMI interface 83
Figure 32 "PROVISION REFRESH (P
83).
83).