Nortel Communication Server 1000 Fundamentals page 77

CLEAR MEMORY DISTANT (C M D)
This command restores all distant-end configuration settings to their
default values. Its display is similar to
M) screen" (page
The command erases and tests the card's entire Flash memory. Firmware
and provisioning information are destroyed.
DISPLAY [ALARM | BLOCK | CONFIG | STATUS | PERFORMANCE |
HIST | MAP] [DIST]
The DISPLAY commands list the condition of various aspects of the MCR
system at the time the command is issued. The commands are described
in alphabetic order.
DISPLAY ALARM LOG (D A)
This command displays the contents of the near-end alarm log. Its display
is similar to
Figure 19
DISPLAY ALARM (D A) screen
DISPLAY ALARM LOG DISTANT (D A D)
This command displays the contents of the distant-end alarm log. Its
display is similar to
DISPLAY BLOCK (D B)
This command displays the statistics related to the blocking of voice calls
on the near end due to the unavailability of T1 timeslots. Its display is
similar to
Figure 20
DISPLAY BLOCK (D B) screen
76).
Figure 19 "DISPLAY ALARM (D A) screen" (page
Figure 19 "DISPLAY ALARM (D A) screen" (page
Figure 20 "DISPLAY BLOCK (D B) screen" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Host MMI interface 77
Figure 18 "CLEAR MEMORY (C
77).
77).
77).