Nortel Communication Server 1000 Fundamentals page 39

remaining channels can be used with "drop-and-insert" channel banks.
Standard T1 test equipment is compatible with MCR because the design
supports standard Pulse Code Modulation (PCM) in standard T1 timeslots.
Note:
Mini-Carrier Remote is not intended for direct connection to the
Public Switched Telephone Network or other exposed plant networks.
Always connect this product to such networks through a certified (by
local, regional, or national safety agency and telecommunications
authority), isolating-type network terminating device (such as CSU,
DSU, NTI, or NCTE) that provides overvoltage protection.
Telephones supported
Analog (500/2500-type) sets are supported in Normal Mode operation.
Analog sets are not supported in ESAM operation.
The digital telephones that are compatible with MCR circuit packs, the LMI
and LMX cards, are:
•
M2006
•
M2008
•
M2008HF
•
M2216
•
M2317
•
M2616
•
M2250
•
M3901
•
M3902
•
M3903
•
M3904
•
M3905
The following table shows the support for the digital phones in the normal
mode and ESAM, starting with firmware load 12.01:
Table 7
Digital Telephone Mode Support as of Release 12.01
Phone Type
M2006
M2008
M2008HF
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Normal Mode
Yes
Yes
Yes
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Engineering guidelines 39
ESAM
Yes
Yes
Yes