Nortel Communication Server 1000 Fundamentals page 82

82 Installation and configuration
Figure 27
ESAM (E) screen
ESAM AUTO (E A)
The ESAM Auto command instructs MCR to operate in the Emergency
Stand-Alone Mode if all carriers go into a level 2 alarm. Its display is
similar to
Figure 28
ESAM Auto (E A) screen
Note:
ESAM toggle switch.
ESAM FORCE (E F)
The ESAM Force command instructs MCR to operate at all times in the
Emergency Stand-Alone Mode. Its display is similar to
Force (E F) screen" (page
Figure 29
ESAM Force (E F) screen
ESAM NEVER (E N)
The ESAM Never command instructs MCR not to operate in the
Emergency Stand-Alone Mode. Its display is similar to
Never (E N) screen" (page
Figure 28 "ESAM Auto (E A) screen" (page
This configuration setting can be overridden by the faceplate
82).
83).
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
82).
Figure 29 "ESAM
Figure 30 "ESAM